1. Manuals
  2. Brands
  3. Echo Manuals
  4. Lawn and Garden Equipment
  5. 02006801
  6. Operator's manual

Echo 02006801 Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Hedge Clipper
Operator's Manual
MODEL
Read rules for safe operation and all instructions carefully. ECHO provides this
Operator's Manual and a Safety Manual. Both must be read and understood for
proper and safe operation.
X7532240301
HC-151
Serial Number 02006801 & Up
WARNING
DANGER
X753000121
12/01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 02006801 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Echo 02006801

Summary of Contents for Echo 02006801

  • Page 1 MODEL HC-151 Serial Number 02006801 & Up WARNING DANGER Read rules for safe operation and all instructions carefully. ECHO provides this Operator's Manual and a Safety Manual. Both must be read and understood for proper and safe operation. X753000121 X7532240301...

  • Page 2: Table Of Contents

    NTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job- dependability. Read and understand this manual and the SAFETY MANUAL you found in the same package. You will find both easy to use and full of helpful operations tips and SAFETY messages.

  • Page 3: Manual Safety Symbols And Important Information

    Locate these safety decals on your unit. Make sure the decals are legible and that you understand and follow the instructions on them. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information.

  • Page 4: International Symbols

    Wear sturdy work shoes with nonskid soles; of machine vibration to your hands. • DO NOT WEAR OPEN TOED SHOES, • DO NOT OPERATE UNIT BAREFOOTED. Hearing Protection Wear no-slip, heavy duty work gloves. Wear hearing protection. ECHO recommends wearing hearing protection whenever unit is used.

  • Page 5: Extended Operation/Extreme Conditions

    Use only ECHO approved attachments. Serious injury may result from the use of a non-approved attachment combi- nation. ECHO, INC. will not be responsible for the failure of cutting devices, attachments, or accessories which have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual and safety manual.

  • Page 6: Safe Operation

    SAFE OPERATION WARNING DANGER Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Provide all users of this equipment with the Operator's Manual and instructions for Safe Operation. Keep a Solid Stance •...

  • Page 7: Description

    The ECHO product you purchased has been factory pre-assembled for your convenience. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.
  • Page 8 16. SAFETY VIDEO - (Not included with unit) P/N 99922202800 English version only is available at a cost of $5.00 from ECHO, INC. or any authorized ECHO dealer. The video overviews safety precautions and proper operating tech- niques and is supplemental to the Safety Manual. Read and understand the Safety Manual for complete information...

  • Page 9: Specifications

    EDGE LIPPER PERATOR ANUAL PECIFICATIONS . t i . l f i r t SSEMBLY This model is factory assembled.

  • Page 10: Pre-Operation

    After Refueling lubrication caused by failure to use an ISO-L-EGD and J.A.S.O. FC certified oil, such as Echo Premium 50:1 Two-stroke Oil, will void the • Wipe any spilled fuel from the unit. • Move at least 3 m (10 ft.) from refueling two-stroke engine warranty.

  • Page 11: Operation

    The blades should not move at idle. If blades move, readjust carburetor according to "Carburetor Adjustment" instructions in this manual or see your ECHO Dealer, otherwise serious personal injury may result. 6. After engine warm up, gradually depress throttle trigger to increase...

  • Page 12: Starting Warm Engine

    DANGER The blades should not move at idle. If blades move, readjust carburetor according to "Carburetor Adjustment" instructions in this manual or see your ECHO Dealer, otherwise serious personal injury may result. 1. Stop Switch Move stop switch (A) away from the STOP position.

  • Page 13: Hedge Trimming

    ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOUR- SELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is not listed, see your ECHO Service Dealer for repairs.

  • Page 14: Maintenance Intervals

    MAINTENANCE INTERVALS n i l t I - t l i t l i n i l l f f l i o s t l t n i ® y l l i r u o i t n i f i r u o i t .

  • Page 15: Air Filter

    EDGE LIPPER PERATOR ANUAL AIR FILTER Level 1. Tools required: 25 or 50 mm (1 or 2 in.) medium bristle paint brush Parts required: 90008 REPOWER AIR & FUEL FILTER KIT 1. Close choke (Cold Start Position). This prevents dirt from entering the carburetor throat when the air filter is removed.

  • Page 16: Spark Plug

    SPARK PLUG Level 2. Tools required: T-wrench, Feeler gauge, Soft metal brush Parts required: 90064 REPOWER Tune-Up Kit 1. Remove spark plug and check for fouling, worn and rounded center electrode. 2. Clean the plug or replace with a new one. DO NOT sand blast to clean.

  • Page 17: Exhaust System

    The cylinder exhaust port must be inspected and cleaned of excess carbon every 3 months or 90 hours of operation in order to maintain this engine within the emissions durability period. ECHO strongly recommends that you return your unit to your ECHO dealer for this important maintenance service. EXHAUST SYSTEM Spark Arrestor Screen Level 2.

  • Page 18: Carburetor Adjustment

    Accelerate to full throttle to check for smooth transition from idle to full throttle. If engine stops or stalls after full warm up return the unit to your authorized ECHO dealer for repair. 6. Check HI speed RPM at W.O.T. (Wide Open Throttle). HI speed RPM should be set to specifications found on page 9 "Specifica-...

  • Page 19: Lubrication

    EDGE LIPPER PERATOR ANUAL 7. Check idle speed and reset if necessary. If a tachometer is available, idle speed should be set to the specification found on page 9 "Specifications" of this manual. WARNING DANGER When carburetor adjustment is completed, the cutting attachment should not move at idle, otherwise serious personal injury may result.

  • Page 20: Blade Stiffener Remove/Install

    Gear Box Assembly Level 1. Tools required: Grease Gun, Clean rag Parts required: ECHO LUBE 14 oz. (P/N 91015) or ® Lithium Based Grease. Clean dirt from the grease fitting. Carefully pump grease into fitting. DO NOT force grease. Too much pressure will force grease past seals and cause damage.

  • Page 21: Sharpening Blades

    5. Loosen blade bolt 1/2 turn then install locknut while holding blade bolt in place. 6. Lubricate blades. See "Blade Lubrication Instructions," on page 19. IMPORTANT Blades should only be removed and reinstalled by an Authorized ECHO Servicing Dealer, otherwise premature wear or internal damage may occur.

  • Page 22: Troubleshooting

    ROUBLESHOOTING l f f t l i f t n I t l i f t l i f WARNING DANGER Fuel vapors are extremely flammable and may cause fire and/or explosion. Never test for ignition spark by grounding spark plug against cylinder, otherwise serious personal injury may result.

  • Page 23: Storage

    EDGE LIPPER PERATOR ANUAL TORAGE WARNING DANGER During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious personal injury may result. Long Term Storage (over 30 days) Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage mainte- nance which includes the following: Store unit in a dry, dust free place, out of the reach of children.

  • Page 24: Servicing Information

    • Sending a check or money order for $2.00 per Parts Catalog or $1.50 per Operator's Manual made payable to ECHO, INCORPORATED. State on a sheet of paper the model number and serial number of the ECHO unit you have, part number of the manual (if known), your name and address and mail to address below.

This manual is also suitable for:

Hc-151

Table of Contents