Step 2: Configure The Nüvi; Step 3: Acquire Satellites; Help When You Need It - Garmin NUVI R NVI 200 Setup Manual

Step 2: Configure the nüvi
To turn on your nüvi, slide the
Power
key to the left. Follow the
on-screen instructions.
To turn off your nüvi, slide the
Power key to the left.

Step 3: Acquire Satellites

Before the nüvi can find your current
location and navigate a route, you must
do the following:
1. Go outdoors to an open area, away
from tall buildings and trees.
2. Turn on the nüvi. Acquiring satellite
signals can take a few minutes.
The bars indicate satellite strength.
When at least one of the bars are green,
the nüvi has acquired satellite signals.
Now you can select a destination and
navigate to it.
NOTE: Software on your nüvi
could differ from the screen shots
in this manual.

Step 4: Use the nüvi
A
Menu Page
Touch to find a destination.
A
Touch to view the map.
B
Touch to open the Tool Kit.
C
Touch to adjust the volume.
D

Help When You Need It

To get more information when and
where you need it, use the nüvi's built-
in Help system. Touch
Touch a topic to view information
about it.
For help about the nüvi's settings,
> Settings. Select a setting
touch
category, and then touch
nüvi 00 Series set up and go! guide
B
C D
> Help.
.