Step 1: Mount Your Nüvi; Step 2: Configure Your Nüvi; Step 3: Acquire Satellites - Garmin nuvi 205 Series Quick Start Manual

Step 1: Mount Your nüvi
Select a suitable location to mount your
nüvi on your windshield. Clean and dry
the suction cup and the selected area of
your windshield.
1. Plug the power cable into the back of
your nüvi.
2. Fit the ball on the end of the mount
into the round socket on the cradle and
press firmly until they snap together.
3. Place the suction cup on the
windshield, and flip the lever back
toward the windshield.
4. Press the bottom of your nüvi into the
cradle, and snap the top of the nüvi
into place.
5. Plug the power cable into a power
outlet in your vehicle. Your nüvi should
turn on automatically if it is getting
power.
You can also mount your nüvi to your
dashboard. See pages 13–14
information.
nüvi 05 Series quick start manual
Step 2: Configure Your nüvi
To turn your nüvi on, slide the
on-screen instructions. To turn your nüvi
off, slide the

Step 3: Acquire Satellites

Before the nüvi can find your current
for more
location and navigate a route, you must
do the following:
1. Go outdoors to an open area, away
Suction-cup mount
Cradle
Power
key to the left. Follow the
Power
from tall buildings and trees.
Vehicle power
cable
key to the left.