Pnp/Pci Configuration - Gigabyte 6WXM User Manual

6WXM
4.10. PnP/PCI Configurations
CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software
PNP OS Installed
Reset Configuration Data
Resources Controlled By
* IRQ Resources
*DMA Resources
*Memory Resources
PCI/VGA Palette Snoop
Assign IRQ For USB
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Figure 4.7: PCI Slot Configuration
PNP OS Installed
The default value is No.
Yes Enable PNP OS Installed function.
No Disable PNP OS Installed function.
Reset Configuration Data
The default value is Disabled.
Disabled Disable this function.
Enabled Enable clear PnP information in ESCD.
PnP/PCI Configurations
No
Disabled
Auto (ESCD)
Press Enter
Press Enter
Press Enter
Disabled
Enabled
4-28
Item Help
Menu Level 4
Select Yes if you
Are using a Plug
And Play capable
Operating system
Select No if you
Need the BIOS to
Configure non-
Boot devices
F1:General Help