Gigabyte 6WXM User Manual page 4

I. Quick Installation Guide :
CPU SPEED SETUP
The system bus frequency can be switched between 66¡ B 1 00MHz and
by adjusting JP6 & JP28 (See Figure-1). The CPU Frequency is
control by BIOS.
M
The CPU speed must match with the frequency RATIO. It will cause
system hanging up if the frequency RATIO is higher than that of
CPU.
JP6 / JP28: System Bus Speed
CPU JP6 JP28
AUTO 1-2
IT8888
66 2-3
100 NC
133 NC
«Note: Please set the CPU host frequency in accordance with your
processor' s specifications. We don' t recommend you to set the
system bus frequency over the CPU' s specification because these
specific bus frequencies are not the standard specifications for
CPU, chipset and most of the peripherals. Whether your system can
run under these specific bus frequencies properly will depend on
your hardware configurations, including CPU, Chipsets, SDRAM,
Cards... .etc.
«Note: JP28 is only available when the motherboard use 82810E
Chipset.
AC97
JP6
YMF
1
744
ICH/
6WXM
82801
1-2
2-3
2-3
NC
Backup Main
BIOS BIOS
Figure-1
2
Quick Installation Guide
JP28
82810/
82810E
1