Appendix - Gigabyte 6CX User Manual

6CX Motherboard

Appendix

Appendix A : AU8810 Driver Installation
A. DRIVER INSTALLATION
If you have older drivers in your system, please uninstall them first as described in Section C below.
1. Power on the system, placing the "Intel chipset Series Mainboard Utility CD" in the CD-ROM drive.
2. During the load process, Windows 95/98 should detect the Vortex PCI board and display a message
such as "New Hardware Found". If Windows prompts you for the drivers of the "PCI Multimedia Audio
Device", then select "Driver Disk Provided by Manufacturer" Select the Vortex CD-ROM's directory.
Note: Some Windows 95 versions (OSR2) do not show this prompt. Instead, they ask whether to
search the diskette and CD-ROM drives for the appropriate drivers.
Installed drivers may include Vortex PCI audio, Vortex wavetable, Vortex mixer, DOS modem port,
Vortex gameport interface, Vortex MPU401 interface, and Vortex Sound Blaster emulation.
Depending on the version of Windows 95 and the configuration of the system, you may be prompted to
provide several file locations. Here are the CD-ROMs and directory locations for which you may be
prompted:
Vortex Installation & Driver Disk
Windows 95/98 Installation Disk
Microsoft DirectX
Vortex Application Setup
PCI Multifunction Audio Device
B. UNINSTALLING WINDOWS 95/98 DRIVERS
To uninstall the Vortex software, you can use the following procedure:
1. Open to the Windows 95/98 Device Manager (right-click on "My Computer"
and select "Properties").
\aureal\win9X
\aureal\win9X
\Utility \directx \dxsetup
\aureal\win9X
\aureal\win9X
77