Gigabyte 6CX User Manual page 47

A.5 Notices :
1. In order for STR to function properly, several hardware and software requirements must be
satisfied:
A. Your ATX power supply must comply with the ATX 2.01 specification (provide more than 720
mA 5V Stand-By current).
B. Your SDRAM must be PC-100 compliant.
2. Jumper JP2 is provided to connect to the STR LED in your system chassis. [Your chassis may
not provide this feature.] The STR LED will be illuminated when your system is in STR sleep
mode.
JP2: STR LED Connector
STR LED Connector
External.
JP2
1
RAM Indicator
34
Suspend To RAM Installation
+
LED1