Gigabyte 6CX User Manual page 81

On Board FDC
Auto Set OnBoard FDC is Auto. (Default Value)
Disabled Disabled OnBoard FDC.
Enabled Enabled OnBoard FDC.
On Board Serial Port A
Auto BIOS will automatically setup the port A address. (Default Value)
3F8/COM1 Enable on Board Serial port A and address is 3F8.
2F8/COM2 Enable on Board Serial port A and address is 2F8.
3E8/COM3 Enable on Board Serial port A and address is 3E8.
2E8/COM4 Enable on Board Serial port A and address is 2E8.
Disabled Disable on Board Serial port A.
On Board Serial Port B
Auto BIOS will automatically setup the port B address. (Default Value)
3F8/COM1 Enable on Board Serial port B and address is 3F8.
2F8/COM2 Enable on Board Serial port B and address is 2F8.
3E8/COM3 Enable on Board Serial port B and address is 3E8.
2E8/COM4 Enable on Board Serial port B and address is 2E8.
Disabled Disable on Board Serial port B.
Serial Port B Mode
Normal Normal operation. (Default Value)
IrDA (1.6 S) Onboard I/O chip supports IRDA (1.6
IrDA (3/16) Onboard I/O chip supports IRDA (3/16 Baud Red).
ASKIR Onboard I/O chip supports ASKIR.
IR Duplex Mode
IR Function Duplex Half . (Default Value)
Half Duplex
IR Function Duplex Full.
Full Duplex
IR Pin Select
IRRX/IRTX IR Pin Select is IRRX/IRTX . (Default Value)
SINB/SOUTB. IR Pin Select SINB/SOUTB.
On Board CIR port
Disabled Disabled On board CIR port . (Default Value)
Enabled Enabled On board CIR port.
S Baud Red) .
68
BIOS Setup