Set-Up And Safety - Grundig PlanaVision 42 PXW 110-8620 Dolby User Manual

10 10
cm cm
20 cm
SAT
TV R
4

SET-UP AND SAFETY

Please note the following information when setting up your PlanaVision:
The device is designed to receive and reproduce video and audio signals.
Any other use is expressly prohibited.
The ideal viewing distance is 5 times the screen diagonal (approx. 5.50 m).
E IN
VBS
IDEO External light falling on the screen impairs picture quality.
Ensure there is enough clearance, for example when installing in an alcove.
The device is designed for use in dry rooms. If you do use it in the open, please
ensure that it is protected from moisture, such as rain or splashing water. Do not
expose the device to any moisture.
The device is not designed for areas of very high humidity (for example the
tropics). The air humidity should not be more than 85%.
Do not place any vessels such as vases on the device. These may spill liquid, thus
presenting a safety risk.
Do not lay any objects (newspapers, for example) on the device.
Do not use the device close to heating units or in direct sunlight. This will impair
cooling.
Heat build-up can be dangerous and diminishes the working life of the set.
Have the inside of the set cleaned from time to time. Ask your specialist dealer.
Do not open the device under any circumstances. No warranty claims are
accepted for damage resulting from improper handling.
Only use genuine GRUNDIG connection cables, accessories and replacement
parts.
Ensure that the mains cable is not damaged.
Thunderstorms are a danger to all electrical devices. Even if the device is
switched off, it can be damaged by a lightning strike to the mains or the antenna
cable. Always disconnect the mains and antenna plugs during a storm.
Only clean the plasma screen with a chamois leather and commercially avail-
able glass cleaner.
Only clean the housing of the plasma screen with a damp, soft cloth and plain
water.
The plasma screen is equipped with a glass plate. If the device is subjected to
excessive strain, for example through vibration, bending or heat shocks the
glass plate can break.
Do not hit or put pressure on the glass plate.
Should the glass plate be damaged, pull out the mains plug immediately.
______________________________________________