Changing The Picture Format - Grundig PlanaVision 42 PXW 110-8620 Dolby User Manual

18
TELEVISION OPERATION

Changing the picture format

1
Select the picture format with »
example »16:9«, appears on the screen.
– You can choose between the following picture formats:
»16:9« and »14:9« formats
During programmes in 4:3 format, the picture is stretched horizontally if
»16:9« or »14:9« is selected.
The picture geometry is stretched horizontally.
With actual 16:9 signal sources (from a set-top box on the Euro-AV socket) the
picture fills the screen completely and with the correct
geometry.
"Panorama" format
This setting is suited to films with a large width/height ratio.
During programmes in 4:3 format the picture is stretched horizontally if the
»Panorama« function is selected. The zoom factor is greater on the left and right
edges of the picture than in the middle.
"Normal (4:3)" format
Programmes in 4:3 format are displayed in the correct aspect ratio.
There are black borders to the left and right of the picture.
"Full Screen" format
For programmes in 4:3 format, the picture automatically fills the screen.
"User Zoom" format
This function allows you to display an individual picture format from 10% to
200% of the original picture size.
1 Select the »User Zoom« picture format with »
2
Press »i« to open the main menu.
3
Select »Display « with »P+« or »P-« and confirm with »OK« .
4 Select »User Zoom« with »P+« or »P-«.
5
Select the picture size with » « or » «.
6
Press »i« to switch off the menu.
"4:3 Letterbox to16:9 " format
The black borders which are usually at the top and bottom of the screen are
eliminated, 4:3 pictures fill the screen.
The transmitted pictures are enlarged, but are slightly cropped at the top and
bottom. The picture geometry remains unchanged.
_________________________________________________________
«. The selected picture format, for
E
«.
E