Connecting The Power Cord; Inserting Batteries In The Remote Control - Grundig PlanaVision 42 PXW 110-8620 Dolby User Manual

CONNECTION AND PREPARATION

Connecting the power cord

1
Plug the power cord supplied into the mains socket of the device.
2
Plug the power cord plug into an earthed safety socket.
Note:
Only connect the television using the power cord supplied to a suitable
earthed safety socket.
Do not use an adapter plug or extension lead which does not meet the
applicable safety standards. Do not tamper with the power cord.
Do not connect any other equipment while the device is switched on. Switch
off the other equipment as well before connecting it.
Only plug the device into the mains socket after you have connected the
external devices and the antenna.

Inserting batteries in the remote control

1
Open the battery compartment by removing the lid.
2
Insert the batteries (Micro type, for example LR 03 or AAA, 2x1.5 V).
Observe the polarity (marked on the base of the battery compartment).
3 Close the battery compartment.
Note:
If the television no longer reacts properly to remote control commands, the
batteries may be flat. Be sure to remove used batteries.
The manufacturer accepts no liability for damage resulting from leaking bat-
teries.
Environmental note
Batteries, including those which contain no heavy metal, may not be dis-
posed of with household waste. Please dispose of used batteries in an envi-
ronmentally sound manner. Find out about the legal regulations which apply
in your area.
_______________________________________
11