Settings; Setting Television Channels Automatically - Grundig PlanaVision 42 PXW 110-8620 Dolby User Manual

Sprache
English
*
Français
*
Deutsch
*
Italiano
*
Español
*
Nederlands
*
Svenska
*
Norsk
*
Suomi
*
Dansk
*
Hrvatski
*
Português
*
Auswählen und mit
OK bestätigen
Ende
Location of TV Set
United Kingdom
*
France
*
Germany
*
Italy
*
Spain
*
Netherlands
*
Sweden
*
Norway
*
Finland
*
Denmark
*
Belgium
*
Other
*
Select and press
OK to proceed
Back End
12

SETTINGS

Setting television channels automatically

The television is equipped with an automatic station search system.
You start the station search and can then sort the television channels into your
order of preference.
There are 99 channel positions available for television stations.
You can delete television stations from the station list which were found more
than once or which have poor reception.
If you receive stations with different TV standards where you live, continue the set-
up as described in the "Re-tuning to new television channels" on page 31.
1
Switch the device to standby by pressing the power switch »IO« on the back
of the device, and then switch it on by pressing »P+« one of the numerical
buttons on the remote control.
– The »Sprache« (Language) menu appears when the television is first
switched on.
Hint:
If the »Sprache« (Language) menu does not appear on the screen, follow the
instructions on re-tuning all television channels on page 33.
2
Select the language with »P+« or »P-« and press »OK« to confirm.
– The »Location of TV Set« menu appears.
3
Press »P+« or »P-« to select the installation site.
Note:
If your country (the site) is not shown, select the option »Other«.
4
Press »OK« to start the search.
– Display: »SEARCHING IN PROGRESS«. The station search begins, and
may last a few minutes, depending on the number of television channels
received.
– After the search, the device switches to channel 1.
Note:
You can interrupt the search by pressing »i«.
____________________________________________________________________________