Table of Contents
Advertisement
Configuring an FTP server
To add an FTP server,
1. Start by giving a name to the server that you are adding to
the recorder.
2. Enter the hostname or the IP address of the FTP server.
3
. Enter the communication port of the FTP server (usually port 21).
4. Enter the username and password of the FTP server if it's required
5. Check "Use Passive Mode" if it's required or leave it unchecked to use active mode.
6. Click "Test" to verify if all information is entered correctly and the connection to the FTP server can be
establis ed successfully.
h
7. Click "Apply" for the settings to take effect.
61
Advertisement
Table of Contents
