Table of Contents
Advertisement
4. It is corresponding information should be displayed in the "Camera Information" section. Enter its
username and password and select the channel ID and name the camera.
5. Click on "Detect" to establish connection between the recorder and the camera. If connection
establishes successfully, camera's detailed information should be polled and displayed as below.
6. Adjust its video format, frame rate, resolution or bitrates...etc if you wish. You can also click on the
"Preview" to preview the live video of the camera.
C lick "Add" to finish adding the camera.
If cameras are marked with "*" in the search result, it means those cameras are already
configured and connected to NVR.
Add a camera manually
Simply follow the instruction described above but instead of using the "Search" function, enter the
camera's IP address and credential in the "Camera Information" manually, then follow step 5 and 6
described above.
49
Advertisement
Table of Contents
