Table of Contents
Advertisement
Do not install the heater in an unusually dusty area.
Use a flue guard if the terminal is easily accessible
to children.
Check local regulations.
Guards are available as an optional extra.
Floor must be level, but see page 23 regarding
adjustable legs. Do not use electrical extension
cords to connect unit to power supply. Keep the
power cord away from the flue.
FLUE MANIFOLD POSITION.
Centre of hole for flue manifold can be drilled
anywhere within the shaded area. (To avoid studs
etc.)
LOCATION
Flue Hole
Before drilling the flue hole, check for water and
gas pipes as well as electric cables.
Use an 80mm (8cm) drill for hole through wall.
MOUNTING TO WALL
Assemble Angle Brackets to Back Spacer Top with
screws provided. Locate heater in position, hold
Wall Bracket in position around Angle Bracket and
mark hole positions, remove heater. Secure Wall
Bracket to wall. Relocate heater in position
ensuring Angle Bracket engages with Wall Bracket.
FLUE EXTENSION KITS
Flue extension Kits are available to allow longer
flueing lengths. Contact Rinnai for information.
– 18 –
Cavity Opening
280
22
217
Hide quick links:
Advertisement
Table of Contents
