Rinnai Energysaver RHFE-556T Installation And User Manual page 17

When positioning the heater the main points
governing the location are:
1. Flueing
2. Warm air distribution
This heater must not be installed where curtains or
other combustible materials could come into
contact with it.
In some cases curtains may need restraining.
See diagram for other recommended clearances.
300mm
50mm
1000mm
Flue fittings must be kept clear of flammable
materials.
LOCATION
This heater is not designed to be built in.
The flue is not designed to be positioned under
floors, or below the level of the heater.
50mm
The flue terminal should be positioned away from
flammable materials.
– 15 –
Flue
Terminal
LP GAS
Flue Terminal
Flue
Terminal