Rinnai Energysaver RHFE-556T Installation And User Manual page 12

CARING FOR YOUR NEW RHFE-556T
This appliance is safely controlled. If there is something wrong then it will stop, as it is protected by
the following safety devices.
Ignition Safety Device
Burner Safety Device
Overheat Safety Device
Your RHFE-556T requires very little maintenance,
simply clean the rear fan filter once a week and wipe
the outer case and louvre section with a damp cloth.
DO NOT USE SOLVENTS.
Solvents may melt or distort plastic parts.
Problem
Cause
Not Plugged In
Power Cut
(Initial Installation)
Air in gas pipe
Gas Filter Blocked
Missed Ignition
Flue terminal obstructed
Flue manifold not connected
Louvre obstructed
Air filter blocked
Gas Escape
Gas turned off at meter
Power Failure Safety Device
Power Surge Safety Device
Fan Delay Safety Device
– 10 –
Remedy
Plug In
Re-ignite manually after
power is restored
Purge air
(Installer)
Service Call
Service Call
Clear obstruction
Service Call
Clear obstruction
Clean filter (weekly)
Service Call
Turn gas on