Using Hp Administration Tools - Axis 5600+ User Manual

Section 9: Management & Configuration
120

Using HP Administration Tools

The AXIS 5600+ is fully compatible with the HP JetAdmin and the
HP Web JetAdmin printer management software. You can use either
tool to install and configure your printer devices, and to monitor the
current status of your AXIS 5600+ and the connected printers.
Please refer to the appropriate Hewlett Packard documentation for
further details about these tools.
To enable support for the HP JetAdmin and the HP Web
Notes:
JetAdmin management software, you must set the
HP_JETADMIN parameter to YES.
It is not possible to upgrade the AXIS 5600+ Flash Memory from
the HP JetAdmin.
If the AXIS 5600+ has been configured with HP JetAdmin or HP
Web JetAdmin, you cannot configure it with AXIS NetPilot
unless you first reset it to the factory default settings.
AXIS 5600+ User's Manual