Audi A5 Owner's Manual page 29

document_0900452a8179700c.book Seite 27 Donnerstag, 22. März 2007 10:19 10
eter and navigation system*. Press the Reset button
switch back and forward between these displays.
Resetting figures to zero
To cancel one of the computer readings individually, select the
required function and press the RESET button
second. The following values can be reset to zero individually using
the Reset button:
Average fuel consumption
Average speed
Driving time
Distance covered
You can also cancel all the values in the single journey memory or
the total journey memory at the same time ⇒ page 27.
Note
The information in the memory is cancelled if the battery is
disconnected.
Controls
A
briefly to
Applies to vehicles: with on-board computer
B
Basic settings for the on-board computer
You can change the basic settings for the on-board
computer on the MMI* or on the sound system control
A
for at least one console.
B
– Select: Function selector button
You can zero all the values in the single journey memory or the total
journey memory at the same time by selecting the Reset menu item.
You can also define which items of information you wish to have
displayed by the on-board computer. If one of these items is
switched off, it will not appear in the display. However, the corre-
sponding figures will still be registered by the on-board computer
and can be switched back on at any time so that they again appear
in the display.
Safety Driving tips General maintenance
Driver information system
CAR
cluster > On-board computer 1 or On-board computer 2.
Self-help
27
Fig. 21 MMI display:
On-board computer
> Instrument
Technical data