Polycom 2-Line Phone Owner's Manual page 35

• Using
• Using or
.
During a call, you can alternate between Handset, Headset, or
Hands-Free Speakerphone modes by pressing the
keys, or picking up the handset.
Call duration on an active call is monitored through a local call
timer. This is visible within the active call window on the graphic
display.
To place a call using the handset:
Do the following steps in any order:
1. Pick up the handset.
2. Dial the desired number using the dial pad.
To place a call using Hands-Free Speakerphone mode:
Do one of the following steps:
1. With the handset on-hook, press
,
dial tone.
2. Dial the desired number using the dial pad.
OR
With the handset on-hook, dial the desired number using the dial
pad.
Press ,
To place a call using the headset
Do one of the following steps:
35
, or the NewCall soft key to obtain
, or .
or
,