Overheat Warning Indicator (Digital Type); Trim Meter; Trim Meter (Digital Type); Hour Meter (Digital Type) - Yamaha 60D Owner's Manual

Basic components
rious engine damage will occur.
1. Oil level indicator
EMU26581
Overheat warning indicator (digital
type)
If the engine temperature rises too high, the
warning indicator will start to blink. For fur-
ther information on reading the indicator, see
page 18.
ECM00050
CAUTION:
Do not continue to run the engine if the
overheat warning indicator is on. Serious
engine damage will occur.
1
1. Overheat warning indicator
EMU26610

Trim meter

This gauge shows the trim angle of your out-
board motor.
17
1
NOTE:
ZMU01867
Memorize the trim angles that work best for
your boat under different conditions. Adjust
the trim angle to the desired setting with the
power trim and tilt switch.
EMU26620

Trim meter (digital type)

This meter shows the trim angle of your out-
board motor.
NOTE:
Memorize the trim angles that work best
G
for your boat under different conditions.
Adjust the trim angle to the desired using
the power trim and tilt switch.
If the trim angle of your motor exceeds the
G
trim operating range, the top segment on
the trim meter display will blink.
ZMU01868
EMU26650

Hour meter (digital type)

This meter shows the number of hours the
ZMU04581
ZMU01869