Removing The Propeller; Installing The Propeller - Yamaha 60D Owner's Manual

Maintenance
tion, or other damage.
Check the propeller shaft for damage.
G
Check the splines / shear pin for wear or
G
damage.
Check for fish line tangled around the pro-
G
peller shaft.
Check the propeller shaft oil seal for dam-
G
age.
NOTE:
If the shear pin equipped: it is designed to
break if the propeller hits a hard underwater
obstacle to help protect the propeller and
drive mechanism. The propeller will then
spin freely on the shaft. If this happens, the
shear pin must be replaced.
EMU29193

Removing the propeller

1. Straighten the cotter pin and pull it out
using a pair of pliers.
2. Remove the propeller nut, washer, and
spacer (if equipped).
49
1. Cotter pin
2. Propeller nut
3. Washer
4. Spacer
5. Propeller
6. Thrust washer
1. Cotter pin
2. Propeller nut
3. Washer
4. Spacer
5. Propeller
6. Thrust washer
3. Remove the propeller and thrust wash-
er.
EMU29230

Installing the propeller

ECM00340
CAUTION:
Be sure to install the thrust washer be-
G
fore installing the propeller, otherwise
1
3
6
2
4
5
ZMU03842