What To Do If - AEG B5701-5 User Manual

40

What to do if ...

What to do if ...
The oven is not heating up
The oven lighting is not oper-
ating
A fault code that is not listed
above appears in the clock
display
If you are unable to remedy the problem by following the above suggestions,
please contact your local Service Force Centre.
Warning! Repairs to the appliance are only to be carried out by qualified service engi-
1
neers. Considerable danger to the user may result from improper repairs.
If the appliance has been operated incorrectly, the engineer's visit will be chargeable,
3
even during the warranty period.
Advice on cookers with metal fronts:
3
Because of the cold surface at the front of the cooker, opening the oven door during (or
just after) baking or roasting may cause the glass to steam up.
Problem
The oven has not been
switched on
The clock has not been set
The required settings have not
been set.
The oven's automatic cut-out
has been triggered.
The fuse in the house's electri-
cal wiring (fuse box) has been
tripped.
The oven light is broken.
Electronic fault
Possible cause Remedy
Switch the oven on.
Set the clock.
Check the settings.
See Automatic cut-out
Check the fuse. If the fuses trip
repeatedly, please call a quali-
fied electrician.
Change the oven light bulb.
Switch the appliance off and on
again via the house fuse or the
safety switch in the fuse box.
If it is displayed again, please
contact the Customer Care De-
partment