Setting DAB Band
1
ON/STANDBY
Press
to set the standby mode.
2
MENU/SET
Press
for over 1 second.
"DAB SCAN AREA" is displayed for 2 seconds.
3
[o p]
Use
8
,
9
or
to select the auto preset
range.
III
ALL BAND
UK ONLY
ALL BAND III : 5A to 13F
UK ONLY :
11B to 12D
4
MENU/SET
Press
.
The standby mode is set.
Tuning in DAB Stations
1
<BAND/2>
[TUNER]
Press
or
to select "DAB".
Automatically begin the DAB search operation.
2
[TU +
TU –]
Press
8
,
9
or
,
broadcast station.
b The broadcast stations are displayed in the order in which they
were scanned.
DAB stations can be stored in the preset memory and played in the
same way as FM/AM stations.
"Automatically Presetting FM Stations (Auto Preset)"
•
"Presetting FM/AM Stations Manually"
•
"Listening to Preset Stations"
•
Auto Scannig Broadcast Stations
Connect the antenna beforehand
1
Set the band to "DAB", then press
least 1 second.
2
[o p]
Press
8
,
9
or
SCAN".
3
MENU/SET
Press
Switching the Reception Information for
the Currently Tuned in DAB Station
1
Perform steps 1 to 2 under "Tuning in DAB stations"
to tune in a DAB station.
2
[TIME/DISPLAY]
Press
b The display switches as shown below each time the button is
pressed.
q Data Label Segment :
Text data included in the broadcast is scrolled.
w Station Name :
The service station name is displayed.
e Program Type :
The category of the tuned in station is displayed.
to select the desired
r Ensemble Name :
The ensemble name is displayed.
t Frequency:
The frequency is displayed.
y Signal Quality :
The reception signal sensitivity is displayed (0 to 100).
b If the reception signal sensitivity is 80 or greater, the
program can be received without noise.
u Audio Information :
The mode of the currently tuned in station and its bit rate are
displayed.
i Data and Time :
MENU/SET
for at
The current date and time are displayed.
b When
updated to the currently displayed time.
to select "AUTO
.
.
MENU/SET
is pressed, the set's internal clock is
Making the DAB Settings
1
[DAB/RDS]
Press
.
b The display switches as shown below each time the button is
pressed.
2
[o p]
Press
8
,
9
or
to select the menu to be
set.
3
[ENTER/MEMO]
Press
.
[Selectable items]
Tuning Aid
:
The reception sensitivity of the currently tuned in frequency is
displayed.
b The program can be received without noise when the cursor move
to the right of the sensitivity display.
Station Order
:
T
he service list is created with the auto scan function.
MULTIPLEX
ALPHANUMERIC
(In order of frequency)
(In alphabetical order)
DRC (
)
:
Dynamic Range Control
Off
1/2
1
DAB Version
:
The DAB module's version is displayed.
DAB Initialize
When the "DAB Initialize" procedure is performed, all the
preset memory settings for the stations and DABs are
reset.
1
Set the band to "DAB", then press
least 1 second.
2
[o p]
Press
8
,
9
or
INITIALIZE".
3
MENU/SET
Press
.
ENGLISH
MENU/SET
for at
to select "DAB