ECS K7VZA Manual page 65

PCI Master
When set to Off any PCI device with Master function will not power on
the system.
PowerOn by PCI Card
When set to Enabled, the system power will be turned on if there is any
PCI card activity from PCI cards that trigger a PME event, such as LAN
or modem cards.
Wake Up On LAN/Ring
When set to Enabled, the system power will be turned on if there is any
LAN card or modem activity.
RTC Alarm Resume
When set to Enabled, the following two fields become available and you
can set the date (day of the month), hour, minute and second to turn on
your system. When set to 0 (zero) for the day of the month, the alarm
will power on your system every day at the specified time.
Primary INTR
When set to On (default), any event occurring at the specified IRQ will
awaken a system which has been powered down.
IRQs Activity Monitoring
This item opens a submenu that enables you to set IRQs that will
resume the system from a power saving mode. Select IRQs Activity
Monitoring and press Enter to display the following menu:
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
IRQs Activity Monitoring
IRQ 3 (COM2)
IRQ 4 (COM1)
IRQ 5 (LPT2)
IRQ 6 (Floppy Disk)
IRQ 7 (LPT1)
IRQ 8 (RTC Alarm)
IRQ 9 (IRQ2 Redir)
IRQ 10 (Reserved)
IRQ 11 (Reserved)
IRQ 12 (PS/2 Mouse)
IRQ 13 (Coprocessor)
IRQ 14 (Hard Disk)
IRQ 15 (Reserved)
: Move Enter : Select
F5:Previous Values
Enabled
Enabled
Enabled
Menu Level
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Enabled
Disabled
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults F7:Optimized Defaults
59
Default: Off
Default: Disabled
Default: Disabled
Default: Disabled
Default: ON
Item Help
F1:General Help