Load Optimal Settings; Load Best Performance Settings; Features Setup Page - ECS K7S7AG Manual

Load Optimal Settings

If you select this item and press Enter a dialog box appears. If you press Y,
and then Enter, the Setup Utility loads a set of fail-safe default values. These
default values are not very demanding and they should allow your system to
function with most kinds of hardware and memory chips.
Note: It is highly recommended that users enter this option to load optimal val-
ues for accessing the best performance.

Load Best Performance Settings

If you select this item and press Enter a dialog box appears. If you press Y,
and then Enter, the Setup Utility loads a set of best-performance default val-
ues. These default values are quite demanding and your system might not
function properly if you are using slower memory chips or other low-
performance components.

Features Setup Page

This page sets some of the parameters for peripheral devices connected to
the system.
AMIBIOS SETUP – FEATURES SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
OnBoard Serial PortA
OnBoard IR Port
OnBoard Parallel Port
Parallel Port Mode
Parallel Port IRQ
Parallel Port DMA
OnBoard PCI IDE
Audio Device
Modem Device
Ethernet Device
IEEE1394 Device
Onboard USB Function
USB Function for DOS
ThumbDrive for DOS
OnBoard FDC
Use this item to enable or disable the onboard floppy disk drive interface.
OnBoard Serial PortA
Use these items to enable or disable the onboard COM1 serial port, and to
assign a port address.
OnBoard IR Port
Use this item to enable or disable the onboard infrared port, and to assign a
port address.
Enabled
3F8h/COM1
Disabled
378h
EPP+ECP
7
3
Both
Enabled
ESC : Quit
Enabled
F1 : Help
Enabled
Enabled
F5 : Old Values (Shift)F2 : Color
Enabled
F6 : Load BIOS Defaults
Disabled
F7 : Load Setup Defaults
Disabled
32
↑↓←→ : Select Item
PU/PD/+/- : Modify