Equipment Overview - Beam DriveDOCKExtreme Installation & User Manual

Tracking / Alert Monitoring
The DriveDOCK Extreme utilizes the Iridium Extreme's tracking and
emergency notification functions. The Track button is enabled (factory
default setting). The Alert Loop (wires to an emergency distress button) is
disabled, and requires Eagle Configuration Tool to enable it.
Tracking
When the Track button is pressed it initiates a Quick GPS message in the
Iridium Extreme handset.
The Track button can be enabled or disabled by holding the track button
for 5 seconds. The Track button is enabled when Track LED is solid GREEN.
Pressing the Track button (when enabled) then initiates a command for the
Iridium Extreme Handset to send a Quick GPS message. Please ensure that
the Quick GPS settings in the handset are correct before using this feature.
Alert
The DriveDOCK Extreme will trigger the emergency SOS function of the
Iridium Extreme handset when there is a break (OPEN) in the alert loop wires.
Please ensure that the SOS settings in the handset are correct before using
this feature.
16

Equipment Overview

1. Latch button
2. Latch
PRESS
3. Feature buttons
4. Mini-USB port
5. Intelligent
handset port
6. Privacy handset
7. Status LED
8. Iridium connector
9. GPS connector
10. Horn alert (BLUE)
11. Alert loop IN
(BROWN)
12. Alert loop OUT
DriveDOCK Extreme
(GREEN)
13. Input Power
(4-way microfit)
14. Speaker connector
15. Mic Connector
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17