Beam DriveDOCKExtreme Installation & User Manual page 17

Docking your Extreme handset
1. At the base of the Iridium Extreme handset there is an accessory
connector cover. Open the cover and move it to the back of the handset,
securing it to the two rear retaining features.
2. Press down the latch button and then gently rotate it up to open
the latch, then place the Iridium Extreme handset into the DriveDOCK
Extreme
3. Lift the latch back over the handset or until it Click's into place
32
"CLICK"
Removing the Iridium Extreme
1. To remove the handset, first press down on the latch button and
then rotate the latch up and away from the handset. The handset
can now be slid up and out of the DriveDOCK. Refit the accessory
connector cover to maintain the IP rating of the Iridium Extreme
handset.
33