Beam DriveDOCKExtreme Installation & User Manual page 27

AT Commands
When utilizing the USB data communication port, the DriveDOCK Extreme
cannot activate AT commands that could interrupt the docking station's
synchronization with the Extreme handset. Therefore, the DriveDOCK
Extreme will block or limit AT commands that could cause any adverse
effects to the functional operation of the cradle. Please refer to the Iridium
"ISU AT Command Reference" document for more details on the AT
commands supported by Iridium.
www.beamcommunications.com/support/drivedockextreme
The document is located under Common Resources then "Iridium AT
command guide. "
The following AT commands are affected:
AT COMMAND CRADLE DEFAULT
STATUS
AT+IPR 6,0
ATEn 1
ATVn 0
AT&Cn 0
ATQ1 1
AT&F0 -
AT&W1 -
AT&Yn -
52
LIMITATION
Auto-baud is permanently
disabled with the default
baud rate set to 19200.
Echo is on permanently
enabled
Numerical responses only
DCD is forced on at all times
ISU responses are not sent
to the DTE
Blocked
Blocked
Blocked
Iridium Extreme Display Definitions
Display Status indicators and Icons
The following icons will appear in your Extreme handset display to provide
you with various information about the phone's activity.
Main Screen Components
1. Battery Strength
2. Indicates an SMS message has
been received
3. Indicates a voicemail has
been received
4. Indicates the keypad is locked
5. Indicates SOS button and
Emergency Mode has been
activated
6. Signal Strength
7. Network/SIM status
8. Date
9. Real Time
10. Left and right soft
key functions
Menu Components
11. Menu Title
12. Black bar scrolls up and down
when using the 2-way nevi-key
13. Menu Options
14. Arrow indicates to scroll up
or down for additional options
15. Left and right soft
key functions
1
2
3
4
5
6
sos
7
Registered
8
9
15:40 09-JUL-11
Menu Help
10
11 Phonebook
Call
12
SMS
13
Edit
Delete
New
Memory Status
Notes
14
Select Back
15
53