Reebok 910 Treadmill Manual page 11

5. Hold the Left Upright (87) against the Base (92).
Be careful not to pinch any wires. Insert two
3/8" x 2 3/4" Screws (7) and two 3/8" x 1 1/4"
Screws (8) with two 3/8" Star Washers (14) into
the Left Upright.
Partially tighten the 3/8" x 2 3/4" Screws (7) and
the 3/8" x 1 1/4" Screws (8) until the heads of the
Screws touch the Left Upright (87); do not fully
tighten the Screws yet.
Attach the Right Upright (not shown) in the
same way. Note: There are no wires on the right
side.
6. Identify the Left Base Cover (78) and the Right
Base Cover (89). Slide the Left Base Cover onto
the Left Upright (87). Slide the Right Base Cover
onto the Right Upright (88). Do not press the
Base Covers into place yet.
Remove the wire tie from the Upright Wire (76).
5
7
14
8
14
6
76
Wire
Tie
87
78
11
87
92
88
89