Advertisement

Model No. RBTL14506.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-877-994-4999
Mon.–Fri. 6 a.m.–6 p.m. MST
Sat. 8 a.m.–4 p.m. MST
ON THE WEB:
www.reebokservice.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Visit our website at
www.proform.com
new products, prizes,
USER'S MANUAL
fitness tips, and much more!
Visit our website at
www.healthrider.com
new products, prizes,
fitness tips, and much more!
Visit our website at
www.nordictrack.com
new products, prizes,
fitness tips, and much more!
Visit our website at
www.weiderfitness.com
new products, prizes,
fitness tips, and much more!
Visit our website at
www.reebokhomefitness.com
®
new products, prizes,
®
fitness tips, and much more!

Advertisement

Table of Contents
loading

Summary of Contents for Reebok RBTL14506.0

  • Page 1 Visit our website at www.proform.com Model No. RBTL14506.0 new products, prizes, Serial No. USER'S MANUAL fitness tips, and much more! Write the serial number in the space above for reference. Serial Number Decal Visit our website at www.healthrider.com new products, prizes,...
  • Page 2: Table Of Contents

    LIMITED WARRANTY ............. . .Back Cover Note: An EXPLODED DRAWING is attached in the center of this manual. REEBOK and the Vector Logo are registered trademarks and service marks of Reebok. This product is manufactured and distributed under license from Reebok International.
  • Page 3: Important Precautions

    13. To purchase a surge suppressor, see must be able to safely lift 45 pounds (20 kg) to your local REEBOK dealer or call the toll-free raise, lower, or move the treadmill. telephone number on the front cover of this manual and order part number 146148, or see your local electronics store.
  • Page 4 21. Do not change the incline of the treadmill by or other electric light or power circuits, or placing objects under the treadmill. where it can fall into such power lines or cir- cuits. When installing an outside antenna sys- 22.
  • Page 5 Power Lines Ground Standoff Clamp Insulators Service Entrance Mast To External Antenna Conductors Terminal of Treadmill Antenna Lead-in Wire Service Entrance Ground Antenna Equipment Wire Discharge Unit Ground Wire Power Service Grounding Ground Ground Electrode System (e.g. Bonding Clamps Clamps Jumper Interior Metal Water Pipe) Optional Antenna Grounding Electrode Driven 8...
  • Page 6: Before You Begin

    The 9500 ES treadmill. The 9500 ES treadmill offers an im- model number of the treadmill is RBTL14506.0.0. The pressive selection of features designed to make your serial number can be found on a decal attached to the workouts at home more enjoyable and effective.
  • Page 7: Assembly

    4 1/2” Bolt (78)–4 xtension Leg Nut (106)–4 ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. 3/4” Tek Screw (58)–4 1/2”...
  • Page 8 2. Identify the Left Upright (73) and the Right Upright (74). Hold the Right Upright near the Right Base Cover (77) as shown. Insert the Upright Wire Harness (75) up through the rec- tangular hole in the bottom of the Right Upright and out of the top of the Right Upright.
  • Page 9 4. With the help of a second person, hold the con- Console sole assembly near the Uprights (73, 74). Assembly Connect the Upright Wire Harness (75) to the Console Wire Harness (71). Make sure to con- nect the connectors properly (see the inset drawing).
  • Page 10 7. Slide the Right Upright Sleeve (96) up against the console assembly. Attach the Right Upright Sleeve with two 3/4” Screws (4). Attach the Left Upright Sleeve (not shown) to the Left Upright (73) as described above. 8. With the help of a second person, raise the front of the treadmill and insert the crossbar on the Base (83) into the cutout in the cardboard stand as shown.
  • Page 11 Before operating the television, you must connect an antenna, a 75 ohm CATV cable, or a VCR to the 75 ohm antenna terminal on the treadmill; a VCR or DVD player to the three audio/video RCA jacks; or a per- sonal audio/video player to the audio/video jack below the television on the console.
  • Page 12: How To Use The Chest Pulse Sensor

    HOW TO USE THE CHEST PULSE SENSOR HOW TO PUT ON THE CHEST PULSE SENSOR • Store the chest pulse sensor in a warm, dry place. Do not store the chest pulse sensor in a plastic bag The chest pulse sensor consists of two components— or other container that may trap moisture.
  • Page 13: Operation And Adjustment

    Grounded Outlet Box the right). To purchase a surge suppressor, see Adapter your local REEBOK dealer or call the toll-free tele- Surge Suppressor phone number on the front cover of this manual and order part number 146148, or see your local electronics store.
  • Page 14 CONSOLE DIAGRAM FEATURES OF THE CONSOLE The console also offers four heart rate programs that control the speed and incline of the treadmill to help The treadmill console offers an impressive array of you keep your heart rate near target heart rate settings. features designed to make your workouts more effec- tive and enjoyable.
  • Page 15 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE Plug in the power cord Insert the key into the console. (see page 13). Next, Reset locate the reset/off cir- See HOW TO TURN ON THE POWER on this Position cuit breaker on the page.
  • Page 16 Select a display mode and follow your Measure your heart rate if desired. progress with the exercise information on the screen. You can measure your heart rate using either the chest pulse sensor (see page 12) or the handgrip As you walk or run on the treadmill, the screen can pulse sensor.
  • Page 17 To stop the program at any time, press the Stop HOW TO USE AN EVENT TRAINING PROGRAM button. To restart the program, press the Start but- ton. The walking belt will begin to move at 1 mph. Adjust the speed of the walking belt as desired by Insert the key into the console.
  • Page 18 If the speed and/or the incline of the treadmill is HOW TO USE A PRESET PROGRAM about to change, the new speed setting and/or in- cline setting will appear on the screen to alert you. Insert the key into the console. When the first segment ends, the...
  • Page 19 When the first segment of the program ends, a se- HOW TO CREATE A CUSTOM PROGRAM ries of tones will sound and the current speed set- ting and the current incline setting will be saved in memory. Program a speed setting and an incline Insert the key into the console.
  • Page 20 press the Speed or Incline buttons. When the cur- HOW TO USE A CUSTOM PROGRAM rent segment ends, the new setting will be saved in memory. To increase the length of the program, first wait until the program is completed. Then, press Insert the key into the console.
  • Page 21 will appear on the screen beside the words “Max HOW TO USE A HEART RATE PROGRAM Target BPM.” If desired, press the Rate/Wt. in- crease and decrease buttons to change the maxi- mum target heart rate setting (see EXERCISE IN- CAUTION: TENSITY on page 29).
  • Page 22 To stop the program at any time, press the Stop source. If you do not wish to use the television, button. To restart the program, press the Start but- select the Console mode. ton. The walking belt will begin to move at 1 mph. When the console compares your heart rate to the Press the Channel buttons to select the target heart rate setting for the current segment of...
  • Page 23 Next, press the Channel (CHAN) buttons until the HOW TO USE THE INFORMATION MODE contrast, color, sharpness, or hue level indicator ap- pears. Adjust the settings, if desired, by pressing The console features an information mode that allows the Volume buttons. you to view treadmill usage information, select a sys- tem of measurement for the console, and turn on and Press the TV button again and add or delete...
  • Page 24 HOW TO ADJUST THE CUSHIONING SYSTEM The treadmill features a cushioning system that re- Cushion duces the impact as you walk or run on the treadmill. Adjustor To increase the firmness of the walking platform, step off the treadmill and slide the cushion adjusters toward Increase the front of the treadmill.
  • Page 25: How To Fold And Move The Treadmill

    HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be- come permanently damaged. Remove the key and unplug the power cord.
  • Page 26: Troubleshooting

    TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
  • Page 27 Next, locate the Reed Switch (14) and the Magnet (12) on the left side of the Pulley (11). Turn the Pulley View until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and 1/8”...
  • Page 28 PROBLEM: The incline of the treadmill does not change correctly SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re- move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level.
  • Page 29: Conditioning Guidelines

    CONDITIONING GUIDELINES is to burn fat, adjust the speed and incline of the tread- WARNING: mill until your heart rate is near the lowest number in Before beginning this your training zone. or any exercise program, consult your physi- cian. This is especially important for individu- For maximum fat burning, adjust the speed and incline als over the age of 35 or individuals with pre- of the treadmill until your heart rate is near the middle...
  • Page 30: Part List

    PART LIST—Model No. RBTL14506.0 R0706A To locate the parts listed below, see the EXPLODED DRAWING attached in the center of this manual. Key No. Qty. Description Key No. Qty. Description Foot Rail Cover Transformer Foot Rail Right Rear Foot Cushion Track Screw Rear Wheel 3/4”...
  • Page 31: Ordering Replacement Parts

    • the MODEL NUMBER of the product (RBTL14506.0) • the NAME of the product (REEBOK 9500 ES treadmill) • the SERIAL NUMBER of the product (see the front cover of this manual) • the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on pages 30 and 31 and the EX-...
  • Page 32 EXPLODED DRAWING—Model No. RBTL14506.0 R0706A To identify the parts shown on this EXPLODED DRAWING, see the PART LIST on pages 30 and 31.
  • Page 33 EXPLODED DRAWING—Model No. RBTL14506.0 R0706A...
  • Page 34: Limited Warranty

    LIMITED WARRANTY WHAT IS COVERED—The entire REEBOK 9500 ES (“Product”) is warranted to be free of all defects in material and work- manship. WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.

This manual is also suitable for:

9500 es

Table of Contents