What To Do If - AEG COMPETENCE B4142-1 User Information

What to do if ...

Symptom
The oven does not heat
up.
Pyroluxe is not func-
tioning.
The oven door is locked The appliance is not plugged
The oven lighting does
not come on.
If you cannot rectify the fault with the help of the information given
above, please contact your local Service Force Centre.
1
Warning: Repairs to the appliance may only be carried out by qualified
specialists. Improper repairs can give rise to significant hazards for the
user.
If the appliance has been used improperly, the customer service engi-
neer's visit or that of the specialist dealer will not be free of charge,
even during the warranty period.
3
Advice on cookers with metal fronts:
Because of the cold surface at the front of the cooker, opening the
oven door during (or just after) baking or roasting may cause the glass
to steam up.
Possible cause
The oven has not been
switched on.
The time has not been set.
The necessary settings have
not been made.
The oven safety cut-out has
been activated.
The circuit breaker (at the
household fuse box) has
tripped or the fuse has
blown.
The oven shelf runner has
not been removed.
in; The door lock has been
activated.
The oven light bulb has
blown.
Solution
Switch on the oven.
Set the time.
Check the settings.
See
Safety Cut-out.
Check the fuse.
If the circuit breaker trips or
the fuse blows several times,
please call an approved elec-
trician.
Remove oven shelf runner.
Plug in the appliance and
wait at least 10 seconds until
the red temperature pilot
light goes off.
Replace the light bulb in the
oven.
51