Drawers; Multipurpose Feeder - Lexmark 131 User Manual

Troubleshooting
M
AKE SURE THE OPTION IS SELECTED
From the computer you are printing from, select the option. For more information, see "Updating available options
in the printer driver" on page 33.

Drawers

M
AKE SURE THE PAPER IS LOADED CORRECTLY
1
Open the paper tray.
2
Check for paper jams or misfeeds.
3
Make sure paper guides are aligned against the edges of the paper.
4
Make sure the paper tray closes properly.
5
Close the door.
R
ESET THE PRINTER
Turn the printer off. Wait 10 seconds. Turn the printer back on.

Multipurpose feeder

C
HECK THE MULTIPURPOSE FEEDER
Make sure the 650‑sheet duo drawer (multipurpose feeder) is installed properly.
C
LEAR ANY JAMS
Clear any jams in the multipurpose feeder.
C
HECK THE POWER CORD CONNECTION
Make sure:
•
The power cord is plugged into the printer and a properly grounded electrical outlet.
•
The outlet has power.
C
HECK THE PAPER
Use recommended paper and specialty media. For more information, see the chapter about paper and specialty
media guidelines.
C
HECK THE PAPER GUIDES
Move the guides in the tray to the correct position for the size loaded.
220