Lexmark 131 User Manual page 135

Understanding printer menus
Menu item
NPA Mode
Off
Auto
USB Buffer
Disabled
Auto
Mac Binary PS
On
Off
Auto
ENA Address
ENA Netmask
ENA Gateway
Description
Sets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
•
Auto is the factory default setting.
• Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Sets the size of the USB input buffer
Notes:
•
Auto is the factory default setting.
•
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
•
Auto is the factory default setting.
•
The Off setting filters print jobs using the standard protocol.
• The On setting processes raw binary PostScript print jobs.
Sets the network address information for an external print server that is attached
to the printer using a USB cable
Note: This menu item is available only if the printer is attached to an external
printer server through the USB port.
Sets the netmask information for an external print server that is attached to the
printer using a USB cable
Note: This menu item is available only if the printer is attached to an external
print server through the USB port.
Sets the gateway information for an external print server that is attached to the
printer using a USB cable
Note: This menu item is available only if the printer is attached to an external
print server through the USB port.
135