Lexmark S410 series Quick Reference Manual page 31

Setting up the printer to fax
Connected to different wall jacks
EXT
LINE
To connect:
Connect the cable from the wall jack to the
Tips for this setup:
• If you have only one telephone number on your line, then you need to set the printer to receive faxes
automatically (Auto Answer On).
• Set the printer to pick up calls two rings after the answering machine. For example, if the answering
machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the
answering machine picks up calls first and your voice calls are received. If the call is a fax, then the
printer detects the fax signal on the line and takes over the call.
•
If you subscribe to a distinctive ring service provided by your telephone company, then make sure that
you set the correct ring pattern for the printer. Otherwise, the printer will not receive faxes even if
you have set it to receive faxes automatically.
PHONE LINE
port of the printer.
Setup 3: Printer is sharing the line with a telephone subscribed to voice mail service
02
To connect:
1 Connect the cable from the wall jack to the
2
Remove the protective plug from the
port.
Tips for this setup:
•
This setup works best if you subscribe to a distinctive ring service. If you have distinctive ring service,
then make sure that you set the correct ring pattern for the printer. Otherwise, the printer will not
receive faxes even if you have set it to receive faxes automatically.
• If you have only one telephone number on your line, then you need to set the printer to receive faxes
manually (Auto Answer Off).
EXT
LINE
port of the printer.
port of the printer, and then connect the telephone to the
31