Ducati 749DARK Owner's Manual page 15

Clock setting
Hold down the button (1) for at least 2 seconds.
Press the button (2) to select AM/PM. Press the button
(1) to confirm selection and enter hours setting mode.
Set hours using the button (2). Press the button (1) to
confirm and enter minutes setting mode.
Set minutes using the button (2). Press the button (1) to
confirm and exit the clock setting mode.
Resetting the trip meter
Select TRIP indication in the display (3). Hold down the
button (2) for at least 2 seconds to reset displayed trip
meter indication.
Setting special function (vehicle model and units of
measurement)
The engine control unit transmits the correct vehicle
model and unit measurement information automatically
for the instrument panel to display. To force a change of
these parameters, turn the key from OFF to ON while
holding down both buttons (1) and (2).
Press the button (1) to scroll through available
configurations.
To store your selection, hold down the button (2) for 5
seconds, until the display will read OFF. Set the key to
OFF.
1
3
E
2
fig. 8
15