Cancelling A Programme; End Of Programme - Electrolux EWF 1098 Instruction Booklet

13. Cancelling a programme

Turn the selector dial to position «Off» to cancel a
programme which is running. Now you can select a
new programme.
14.How to open the door during
the cycle of a programme
You can open the door, after having set the washing
machine to PAUSE phase, by pressing "Start /
Pause" button provided the following conditions
exist:
1) the washing machine is not in the heating phase
beyond 55°C
2) the level of the water is not high;
3) the drum is not turning.
After approximately 3 minutes, you can open the
door.
Pay attention to the level and temperature of the
water in the washing machine!

15. End of programme

The washing machine stops automatically at the end
of the program giving an audible signal.
If the Rinse Hold option has been selected, the
LED of the "Start / Pause" button goes off, the LED
and the "End" LED remain lit to indicate that the
spin phase is eliminated.
To spin the laundry select the spin speed by means of
the relevant button and then press the "Start / Pause"
button. The laundry is spun at the selected spin
speed.
Turn the programme selector dial to position «Off» to
switch the machine off.
Remove the laundry from the washing machine.
Check whether the drum is completely empty, by
rotating it with your hand. The purpose of this is to
prevent any items of laundry from remaining
accidentally in the drum, where they might get
damaged in a subsequent wash (e.g. by shrinking) or
bleed colour into another load of laundry.
We advise you to close the water supply tap and
disconnect the plug from the socket.
Leave the door ajar in order to air the washing
machine.
17