Delay Start Button; Options Button - Electrolux EWF 1098 Instruction Booklet

5. Options Button

Depending on the programme, different functions can
be combined. These must be selected after choosing
the desired programme and before pressing the "Start
/ Pause" button.
When these buttons are pressed, the corresponding
LED will light up. When they are pressed again, the
corresponding LED goes out.
If an incorrect option is selected, the LED flashes for
about 2 seconds and the message Err is displayed.
Press these buttons to select the following options:
1.Fresh Plus: Selecting the Fresh Plus option will add
Silver ions to the final rinse of your selected washing
cycle. The Silver ions will be deposited on your
clothes and will help to reduce the growth of bacteria
to make your clothes smell fresher for longer. Fresh
Plus may be selected with all of the programmes.
2.Prewash: Select this option if you wish your laundry
to be prewashed before the main wash (not
available for wool ,handwash ,mini programme or
any "quick" programme.)
The Prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics,
whereas in the programme for delicate fabrics the
water is only drained.
3.Extra Rinse: This option can be selected with all
programmes, except the wool and handwash
programme. The machine will add 2 rinses for
cottons and 1 rinse for synthetics, delicates and silk
programme.This option is recommended for people
who are allergic to detergents, and in areas where
the water is very soft.
4.Time Save: This option can be used for lightly soiled
(not for wool, hand wash, silk and miniprogramme)
in order to obtain a good washing programme in a
short time. The washing time will be reduced
according to the type of fabric and the selected
temperature.

6. Delay start Button

The wash programme can be delayed from 30 min -
60 min - 90 min, 2 hours and then by 1 hour up to a
maximum of 23 hours by means of this button.
Selecting the Delay Start
• Select the programme and the required options.
• Select the delay start.
• Press "Start / Pause" button: the machine starts its
hourly countdown.
The programme will start after the selected delay has
expired.
Delay Start cannot be used with "Drain", "Spin" or
"Delicate spin" .
Cancelling the delayed start
• Press "Start / Pause" button.
• Press "Start / Pause" button until "0'" is displayed.
• Press "Start / Pause" button again.
9