Before Using The Oven For The First Time - Electrolux EOB33200 Instruction Booklet

Safety Thermostat
To prevent dangerous overheating
(through incorrect use of the appliance or
defective components), the oven is fitted
with a safety thermostat, which interrupts
the power supply. The oven switches
back on again automatically, when the
temperature drops.
Should the safety thermostat trigger due
to incorrect use of the appliance, it is
enough to remedy the error after the oven
has cooled down; if on the other hand, the
thermostat triggers because of a defective
component, please contact Customer
Service.

Before using the oven for the first time

Remove all packaging, both
inside and outside the oven, before
using the oven.
Before using for the first time, the oven
should be heated up without food.
During this time, an unpleasant odour
may be emitted. This is absolutely
normal. It is caused by manufacturing
residues.
Ensure the room is well ventilated.
1. Switch the oven function
control knob to conventional
cooking
2. Set the thermostat control
knob to 250°.
4. Open a window for ventilation.
5. Allow the oven to run empty
for approximately 45 minutes.
.
The cooling fan
The cooling fan is designed to cool the
the oven and the control panel. The fan
switches on automatically after a few
minutes of cooking. Warm air is blown
out through the aperture near the oven
door handle. When the oven is switched
off, the fan will remain on in order to cool
the oven and kitchen cabinets properly,
after which it switches off automatically.
Then let the oven cool down. Then
dampen a soft cloth with warm
water and a little mild washing-
up liquid and use this to clean the
oven cavity.
Before using for the first time,
carefully
accessories as well.
To open the oven door, always
hold the handle in the centre.
electrolux 9
wash the oven