Antenna Connections - Go-Video GV2020 Owner's Manual

Antenna
Connections
Coaxial
or
Twin-lead Adapter
(supplied)
ANTENNA CABLES
32
There are numerous possibilities for connecting your VCR-2, your TV, your
antenna or cable system, your other video equipment, and your stereo
receiver. To choose an installation that fits your needs and your equipment,
follow these steps.
If you don't have a cable system, see Antenna Connections on this and
the next page.
If you have a cable system but have no scrambled channels, use Cable
Connection 1, page 34.
If you have a cable system with a converter (some or all channels
scrambled), use Cable Connection 2 or Cable Connection 3, or consult
your cable company for advice on other connections (which may
require additional equipment).
Combined VHF/UHF Antennas, VHF only, UHF
only
Connect your antenna cable to the In from Antenna/Cable connection
(use the supplied adapter if your cable is twin-lead).
A cable is supplied with your VCR-2. Connect the coaxial (round) end of
this cable to the Out to TV connection. Connect the other end of the
supplied cable to the combined VHF/UHF input on your TV.
Use a VHF/UHF splitter (not included) if your TV has separate VHF and
UHF inputs.
CH 3
OUT TO TV
CH 4
IN FROM: ANTENNA/
CABLE
DUAL-DECK VCR BACK PANEL
VCR Cable
VIDEO
IN OUT
Dual-Deck
(supplied)
VHF/UHF
TV BACK PANEL