Front Panel Display - Go-Video GV2020 Owner's Manual

Dual deck vcr-2
Table of Contents

Advertisement

SAP
SAPSET
MONO
STEREO
Deck Status
This illustration shows all the indicators on the Front Panel Display. The
indicators will not all be displayed at one time.
The Front Panel Display shows the status for one deck at a time. You can
choose the deck that is displayed by pressing Deck 1 or Deck 2 from the
Remote Control. There must be a tape in the compartment for that deck's
status to display. For your convenience, the On-Screen Display, which
appears on your TV screen, shows the status of both decks.
CATV - Indicates that STD CATV, HRC CATV, or IRC CATV has been chosen
for Antenna Source.
Channel - Displays the number of the channel being received by the VCR-2
tuner.
Clock/Tape Counter - Displays the present time or Tape Counter number.
Day of Week - Displays the current day.
Deck Status - Displays the present status of the last deck viewed, such as
REC when a recording is in progress. Deck Status is blank if that deck
does not contain a tape.
LINE - This indicator reserved for future use.
MONO - Indicates that the Audio Source is set to Mono.
ON - Indicates that One-Two Recording™ is in progress.
OTR - Indicates that One-Two Recording is in progress.
PROG - Indicates that a Timer Recording event has been programmed.
SAP - Indicates that a Second Audio Program (SAP) signal is being received.
SAPSET - Indicates that the Audio Source is set to SAP or SAP + TV.
SIMUL - Indicates that the Audio Source is set to Simulcast.
Speed - Displays the present recording or play speed.
STEREO - Indicates that a stereo signal is being received.
Tape - Indicates that a tape is in one or both of the decks.
TIMER - Indicates that a Timer Recording event is in progress, or a Timer
Recording event has been set and your VCR-2 is off. Blinks for Timer
Record Error.
VCR - Indicates that your VCR-2 is the source of the picture on your TV
screen.
SUN
VCR
ON
SP
LP
EP
TIMER
Speed
Tape
Front Panel
Display
MON
TUE
WED
:
:
:
PROG
OTR
LINE
Clock/Tape Counter
The Front Panel Display is located in the
center of your VCR-2 Front Panel.
SAT
THU
FRI
AM
CH
PM
SIMUL
CATV
Channel
29

Advertisement

Table of Contents
loading

Table of Contents