Pro-Form 7.0 Re Elliptical Manual page 12

13. Orient the Front Upright Cover (16) as shown.
Attach the Front Upright Cover (16) around the
Upright (2) by pressing it into the Rear Upright
Cover (3).
14. Identify the Front Pivot Covers (22).
Attach a Front Pivot Cover (22) to the Right
Upper Body Arm (9) with two M4 x 16mm
Screws (64).
Repeat this step on the other side of the
elliptical.
13
2
3
14
22
8
64
12
16
9
22