Planet VIP-156 User Manual page 30

Field
Call Waiting
Ring Timeout
Caller ID Scheme
CID Type II
T.38 (FAX)
T.38 Pass-trough
codec
Auto Answer and PIN (VIP-157)
Field
Auto Answer Type
AutoAnswer
cournte
r
PIN Code
PIN Code Number
Description
Default is enable.
When you are talking with other people, You can choose If you want to
hear the notice when th ere is a ne w coming call. If the call waiting
function is On, if there is a new incomeing call, you will hear the call
waiting notice in your cu rrent call. If you set the function to Off, then
you will not hear any notice.
Default is 60(sec). After how long the system will repl y the busy(486
busy) message.
Set thecaller ID mode, it support FSK Bellcore, DTFM, CID-Japnan,
DTMF-Brazil, DTMF-Denmark.
FSK Bellcore: FSK caller ID mode.
DTMF: Before first ring it will send the DTMF caller ID data.
CID-Japnan: Janpan (Janpan) caller ID mode
DTMF-Brazil: Brazil (Brazil) caller ID mode
DTMF-Denmark: Denmark (Denmark) caller ID mode
To enable the show caller ID function in call waiting.
When enable this function system receive a new call in call waiting, it
will display the caller ID
Note: Your Phone must also support CID Type2.
E
nable/Disable T.38 FAX function.
Define the T.38 pass through codec, it can support G.711 u-law/G.711
a-law.
Description
Auto Answer: There are different incoming call types for flexable
applications. The Trunk Gateway function needs to arrange in with the
registered Server System. The 3-Party subscribers could make
Off-Net call (PSTN) through the FXO port of VIP-157.
Auto Answer Counter is to set after the ring count met the number you
set then the auto answer will enable.
For security issue, You'd better to set the PIN Code. If you have set
the PIN code, you will hear a tone to inform you input the PIN Code
then you can dial out. Please notice that the PIN Code function
couldn't function with Trunk Gateway function together.
30