SeQual Eclipse 2 User Manual page 30

Step 5: ADJUST THE FLOW SETTING TO THE PRESCRIBED LEVEL
Using the flow Setting buttons, adjust the flow setting to the prescribed setting sup-
plied by your physician.
WaRnIng
Step 6: BEGIN USING YOUR ECLIPSE
Breathe normally through the nasal cannula.
notE: You will achieve longer duration-of-use when operating your device from
the Power Cartridge if you operate your Eclipse in the Pulse Flow Mode.
Step 7: MOBILE CART OPERATION
The Mobile Cart is designed for use on pedestrian-type surfaces.
Align the locator holes on the bottom of the device to the tabs on the Mobile Cart.
Align the large threaded screw to the insert at the back of the Eclipse. Then hand-tight-
en the knob on the mobile cart until the Mobile Cart is tightly secured to the device.
Depress the push-button on the Mobile Cart handle to adjust the height of the handle.
Step 8: POWER OFF THE DEVICE
Press and hold the "on/off" Button for two (2) seconds to power OFF your Eclipse.
Store the Eclipse in a cool and dry location.
30
Personal Ambulatory Oxygen System Users Manual Personal Ambulatory Oxygen System Users Manual
do not changE fRom pREScRIbEd floW SEt-
tIng WIthoUt conSUltIng WIth a QUalIfIEd
clInIcIan oR phySIcIan.