Configuring The Language And Speech Options - Blaupunkt TravelPilot Amsterdam NAV 35E Operating And Installation Manual

INTRODUCTION NAVIGATION
4 Adjust the value that you want using the menu knob :.
5 Press the OK button ; or the ESC button = to accept the setting.
The display menu appears in the display again.
6 Press the ESC button = twice to close the display menu.

Configuring the language and speech options

Note: The navigation CD-ROM must already be inserted in the de-
vice before you can change the language and speech options.
You can configure the following settings:
LANGUAGE - You can choose between the following languages for the dis-
play content and the navigation speech output:
German, English (metric), English (imperial), French, Italian, Dutch, Span-
ish, Portuguese, Swedish, Danish, Finnish, Czech, Norwegian and Turkish.
SPEECH OUTput - Switches speech output for navigation on/off.
SPEECH OPTion - You can choose whether you want the speech output to
provide detailed information on the roads that you are travelling along (only
A-roads and motorways) or whether traffic information should be provided in
detail with road names in the event of a traffic jam (TRAF. INFO setting).
Note: Navigation speech output depends on the navigation CD be-
ing used. The display content will be displayed in the selected lan-
guage but the speech output might be in English.
RADIO CD / MP3 CD CHANGER SETUP
DimmIng
16
TMC
APPENDIX
84
NAV