Picture Setting - Teac LCDV2257DVR User Manual

TV Operation and System Setup
Rename a channel: (this function is only available for ATV channels)
Press the ▲▼ button to select a channel you want to rename and press the green button to set a
" on the channel. Press the ◄► button to highlight the character position of channel
symbol "
name and press the ▲▼ button to select desired character, press the green button to confirm and
return.
Move a channel: (this function is only available for ATV channels)
Press the ▲▼ button to select a channel you want to move and press the yellow button to set a
" on the channel. Press the ▲▼ button to select the desired position and press the
symbol "
yellow button to move the selected channel to the position you select.
Skip a channel:
Press the ▲▼ button to select a channel you want to skip and press the blue button to set the
channel skipped. A symbol "
cancel, press the MENU button to return.
Note:
A skipped channel is skipped when using the CH+/- button to browse the channels but can be
watched by selecting in the channel list or using the number buttons.

Picture Setting

Press the MENU button once to enter CHANNEL setup
menu and press the ▲▼ button to select PICTURE, the
screen will display as shown.
Press the ENTER or ► button to enter the menu.
In the PICTURE setup menu, press the ▲▼ button to
select the desired item.
Press the MENU button to return to the previous menu.
Press the EXIT button to exit.
Picture Mode
Press the ▲▼ button to select Picture Mode and press the ◄► button to select Standard, Mild, User or
Dynamic.
Contrast
Press the ▲▼ button to select Contrast and press the ◄►
or ENTER button to enter the contrast adjusting bar. Press the
◄► button to adjust the difference between the brightest
and darkest regions of the picture.
" is appear on the skipped channel. Press the blue button again to
23