Ford F750 Owner's Manual page 59

Driver controls
To set a lower set speed
Instrument panel-mounted
controls: Press and hold RESUME
RESUME
-. If the vehicle is moving, this will
decrease vehicle speed; if the
vehicle is stationary, this will
SET
decrease engine RPM. Release the
control when the desired vehicle
speed/engine RPM is reached.
Press and release RESUME - to operate the tap-down function. Each
press will decrease the set speed in increments of 1.6 km/h (1 mph) or
engine RPM in idle mode.
Steering wheel-mounted
controls: Press and hold COAST.
Release the control when the
desired vehicle speed is reached.
Press and release COAST to operate
the tap-down function. Each press
wiill decrease the set speed in
increments of 1.6 km/h (1 mph).
59
2004 F650/750 (f67)
Supplement
USA English (fus)