Table of Contents
Advertisement
The dishes are not clean
Limescales particles on the
dishes
The dishes are wet and dull
There are streaks, milky spots
or a bluish coating on glasses
and dishes
Dry water drop signs on
glasses and dishes
Technical data
Dimensions
Electrical connection - Voltage
- Overall power - Fuse
Water supply pressure
Capacity
Installation instructions
Installation
WARNING!
Make sure that mains plug is disconnected from the mains socket during installation.
The cleaning results are not satisfactory
• The selected washing programme is not applicable for the type
of load and soil.
• The baskets are loaded incorrectly so that water cannot reach all
surfaces.
• Spray arms do not turn freely because of incorrect arrangement
of the load.
• The filters are dirty or not correctly installed.
• The quantity of detergent is too little or missing.
• The salt container is empty.
• The water softener is adjusted on a wrong level.
• The salt container cap is not closed correctly.
• No rinse aid has been used.
• The rinse aid dispenser is empty.
• Decrease the rinse aid dosage.
• Increase rinse aid dosage.
• The detergent can be the cause.
Width cm
Height cm
Depth cm
Information on the electrical connection is given on the rating
plate on the inner edge of the dishwasher door.
Minimum
Maximum
Place settings
23
Technical data
59,6
81,8 - 89,8
57,5
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
12
Advertisement
Table of Contents
