SECTION 4: CLEANING
SECTION 4
Clean the camera lens and IR lamp shield with an approved glass cleaning solution and a
lint free cloth.
Dust can be removed from the unit by wiping it with a soft damp cloth. To remove
•
stains, gently rub the surface with a soft cloth moistened with a mild detergent
solution, then rinse and dry it with a soft cloth.
Remove all foreign particles, such as plastic or rubber materials, attached to the
•
camera housing. These may cause damage to the surface over time.
CAUTION
www.observint.com
12
Cleaning
Do not use benzene, thinner or other chemical products on the camera
assembly; these may dissolve the paint and promote damage of the
surfaces. Before using any chemical product, read the accompanying
instructions carefully.