Section 3 Aiming The Camera - Observint CD80B User Manual

SECTION 3
1. Connect the video cable from the camera to a test monitor or to the BNC input on the
DVR.
2. Apply 12 Vdc power to the camera.
3. Loosen the bezel set screws until the camera module and housing can be rotated on
the base.
4. While observing the video from the camera, rotate the camera and housing and/or
tilt the camera within the housing to point it at your surveillance target.
5. Tighten the bezel set screws to hold the camera assembly together.
6. If you have a CD80BVF /CD80WVF or CD80BHRVF / CD80WHRVF camera, use a small
blade screwdriver to adjust the focus and zoom if necessary.
SECTION 3: AIMING THE CAMERA
Aiming the Camera
Infrared Turret CCD Camera User Manual
11